Description

Garage Door Safety System Commercial Package, just add the light system of your choice. Lights must be purchased separately, all light options are compatible. With this 5 amp power supply you can run up to 4 lights at the same time.

Garage Door Safety System Commercial Package includes: Main control unit with special extended wall mount brackets, power supply 5 amp with 30″ power cord and 30′ extension cable,  2 track mount switches with 25′ cables and special extended mount brackets for upper and lower track mounting kit with special magnet kit.

Commercial Main Unit locating   

Use brackets as shown to mount unit when there  is limited room between tracks of  multiple doors. These brackets bring this main unit out away from wall when the door has sure stop bottom brackets or similar. No serviceable component’s are inside the unit so don’t worry about access to the latches. Location should be determined by wiring length, usually 8 feet off the ground works best. You have the option of using up to 4 lights but you will need to order a splitter for each additional light. Running the power from the 12vdc transformer to the main unit within 30 feet of electrical outlet. The lights and switches have 25’ cables included. After installing track switches as per instructions, securely run wiring to the main unit. Mount your light or lights of choice as per included instructions and securely run wiring to the main unit.

When wiring is at the main unit attach to well marked connectors. If the lights are green when the door is closed just switch connections on low and high switch connector. Use plastic ties on the back of the unit to secure the extra wire neatly to the back of unit. Plug the power in and your all set, lights flash red when the door is in motion or partially open and lights are green when the door is fully open.